Jeppesen JeppView 3 - Manual (Page 9)

14
Updating Your Media (Continued)
5. Once the LED light on the media adapter signifies writing is complete,
safely remove the adapter by double-clicking SafelyRemoveHardware
in the system tray.
6. Click Task>ExitApplication and finish the installation of ECD Disc 2.
7. The Installation Complete dialog box provides options to view the
Readme file and start the update process on Disc 2. To accept and
continue, select both check boxes and then click
Next.
After you have programmed your chart data to your media, you are
ready to transfer the data to your MFD system. Refer to the MFD
manufacturer User’s Guide to update the data in your MFD system.
IMPORTANT Before flying, verify that the chart data cycle in the MFD
system is correct.
If you encounter any problems within JSUM, please refer to the Help file by
clicking
Help>HelpTopics in the JSUM application.
NOTES