NISSAN 2015 Xterra - Owner's Manual - Manual (Page 41)

2. Insert the shoulder belt into the back of the
comfort guide
᭺
C so that the seat belt lays
flat in the guide. Be sure that the comfort
guide routes the seat belt properly over the
center of your shoulder and across your
chest. The belt should be away from your
face and neck, but not falling off of your
shoulder.
3. To return the seat belt comfort guide to the
stowed position, route the comfort guide
strap
᭺
D in the channel under the rear seat
driver’s side seating position head
restraint/headrest and attach the guide in
the clip. Lower the head restraint/headrest
᭺
E on the rear seat driver’s side seating
position.
Shoulder belt height adjustment (front
and rear outboard seats)
The shoulder belt anchor height should be ad-
justed to the position best for you. For additional
information, refer to “Precautions on seat belt
usage” in this section. To adjust, pull out
᭺
1 the
adjustment button and move the shoulder belt
anchor
᭺
2 to the desired position so the belt
passes over the center of the shoulder. The belt
should be away from your face and neck, but not
falling off your shoulder. Release the adjustment
button to lock the shoulder belt anchor into posi-
tion.
LRS2494 LRS2495
Front and rear outboard seats
LRS0242
1-22 Safety—Seats, seat belts and supplemental restraint system