NISSAN 2015 Xterra - Owner's Manual - Manual (Page 164)

Backing up near a projecting object
The vehicle may seem to nearly clear the object in
the display. However, the vehicle may hit the
object if it projects over the actual backing up
course.
Backing up behind a projecting object
The position
᭺
C is shown farther than the position
᭺
B in the display. However, the position
᭺
C is
actually at the same distance as the position
᭺
A .
The vehicle may hit the object when backing up to
the position
᭺
A if the object projects over the
actual backing up course.
ADJUSTING THE SCREEN
The procedure for adjusting the display settings
of the screen differs depending on the type of
screen present on the vehicle.
For vehicles without Navigation System
1. Firmly apply the brake and place the shift
lever in R (reverse)
2. Press the ENTER/SETTING button.
3. The screen will display the Brightness set-
tings.
4. Turn the TUNE/SCROLL knob to adjust the
setting up or down.
5. Press the ENTER/SETTING button again to
display the Contrast settings.
6. Turn the TUNE/SCROLL knob to adjust the
setting up or down.
7. Press the ENTER/SETTING button to com-
plete the adjustment.
● Do not adjust the display settings of the
RearView Monitor while the vehicle is mov-
ing.
LHA2946 LHA2452
Monitor, climate, audio, phone and voice recognition systems 4-13