NISSAN 2012 Titan - Owner's Manual - Manual (Page 345)

Checking tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge squarely
onto the valve stem. Do not press too
hard or force the valve stem side-
ways, or air will escape. If the hissing
sound of air escaping from the tire is
heard while checking the pressure,
reposition the gauge to eliminate this
leakage.
3. Remove the gauge.
4. Read the tire pressure on the gauge
stem and compare to the specifica-
tion shown on the Tire and Loading
Information label.
5. Add air to the tire as needed. If too
much air is added, press the core of
the valve stem briefly with the tip of
the gauge stem to release pressure.
Recheck the pressure and add or
release air as needed.
6. Install the valve stem cap.
7. Check the pressure of all other tires,
including the spare.
Size Cold Tire Inflation
Pressure
Front Original Tire:
P265/70R18
P275/70R18
P275/60R20
240 kPa, 35 PSI
Rear Original Tire:
P265/70R18
P275/70R18
P275/60R20
240 kPa, 35 PSI
Spare Tire:
P265/70R18
P275/70R18
P275/60R20
240 kPa, 35 PSI
LDI0393
8-36 Maintenance and do-it-yourself