beautypg.com

How to use remote keyless entry system -8 – NISSAN 2012 Titan - Owner's Manual User Manual

Page 149

background image

Be sure to remove the key from the vehicle
before locking the doors.

The keyfob can operate at a maximum distance of
approximately 33 ft (10 m) from the vehicle. The
effective distance depends upon the conditions
around the vehicle.

As many as 5 keyfobs can be used with one
vehicle. For information concerning the purchase
and use of additional keyfobs, contact a NISSAN
dealer.

The keyfob will not function when:

● the battery is discharged.
● the distance between the vehicle and the

keyfob is over 33 ft (10 m).

The panic alarm will not activate when the
key is in the ignition switch.

CAUTION

Listed below are conditions or occur-
rences which will damage the keyfob:

Do not allow the keyfob, which contains

electrical components, to come into
contact with water or salt water. This
could affect the system function.

Do not drop the keyfob.

Do not strike the keyfob sharply against

another object.

Do not change or modify the keyfob.
Wetting may damage the keyfob. If the

keyfob gets wet, immediately wipe until
it is completely dry.

Do not place the keyfob for an extended

period in an area where temperatures
exceed 140°F (60°C).

Do not attach the keyfob with a key

holder that contains a magnet.

Do not place the keyfob near equip-

ment that produces a magnetic field,
such as a TV, audio equipment and per-
sonal computers.

If a keyfob is lost or stolen, NISSAN rec-
ommends erasing the ID code of that key-
fob. This will prevent the keyfob from un-
authorized use to unlock the vehicle. For
information regarding the erasing proce-
dure, please contact a NISSAN dealer.

HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM

Locking doors

1. Close all windows.

2. Remove the key from the ignition switch.

3. Close the hood and all doors.

4. Press the

button on the keyfob. All

the doors lock. The hazard warning lights
flash twice and the horn beeps once to
indicate all doors are locked.

LPD0209

3-8

Pre-driving checks and adjustments