NISSAN 2012 Titan - Owner's Manual - Manual (Page 344)

Tire and loading information label
᭺
1 Seating capacity: The maximum num-
ber of occupants that can be seated
in the vehicle.
᭺
2 Vehicle load limit: See loading infor-
mation in the “Technical and con-
sumer information” section.
᭺
3 Original tire size: The size of the tires
originally installed on the vehicle at
the factory.
᭺
4 Cold tire pressure: Inflate the tires to
this pressure when the tires are cold.
Tires are considered COLD after the
vehicle has been parked for 3 or more
hours, or driven less than 1 mile (1.6
km) at moderate speeds. The recom-
mended cold tire inflation is set by the
manufacturer to provide the best bal-
ance of tire wear, vehicle handling,
driveability, tire noise, etc., up to the
vehicle’s GVWR.
᭺
5 Tire size - refer to “Tire labeling” later
in this section.
᭺
6 Spare tire size.
LDI0485
Maintenance and do-it-yourself 8-35