NISSAN 2014 Quest - Quick Reference Guide - Manual (Page 22)

20
TrIP COMPuTer
When the button 01 is pressed, the following
modes will appear on the vehicle information
display
02 :
MPG/aVG – Displays the current and average
fuel consumption.
MPG/MPH – Displays the average fuel consumption
and speed since the last reset.
TIMe/miles – Displays the elapsed time and total
distance the vehicle has been driven since the last reset.
raNGe – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
OuTSIDe TeMP – Displays the exterior air
temperature, including a low temperature warning feature.
SeTTING – Allows you to set reminders for alerts and maintenance intervals or change the
language and units used in the system.
• Press the button 03 to cycle through the various setting modes.
• Press the button 01 to choose the selected menu.
warNING – Displays when a warning is present.
To reset Trip a and Trip B, go to the desired mode on the trip computer and hold the TrIP
reSeT button 04
for more than 1 second.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
02
03
BLueTOOTH ® HaNDS-Free PHONe SYSTeM (if so equipped)
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the or
button to interrupt the voice
prompts at any time and speak a command after
the tone.
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing HVAc vents away from
the ceiling.
Speak naturally without long pauses and without raising
your voice.
Microphone
Bluetooth ® Controls
*Some jurisdictions prohibit the use of cellular telephones while driving.
system guide
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
04
1490690_14_Quest_QRG_072513.indd 20 7/25/13 9:24 AM