Headlight control switch – NISSAN 2014 Quest - Quick Reference Guide User Manual

Page 15

HeaDLIGHT CONTrOL SwITCH

HEADLIGHT cONTROL

Turn the headlight control switch to the

position

to turn on the front parking, side marker, tail, license

plate and instrument panel lights. Turn the switch to the

position

to turn on the headlights.

AUTOLIGHT SYSTEM (if so equipped)

The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.

To activate the autolight system, turn the headlight control switch to the auTO position

then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF position,

position

HIGH BEAM SELEcT

Push the headlight control switch forward

select the high beam function. The blue indicator light

illuminates in the instrument panel. Pull the

headlight switch back to the original position to select
the low beam

. The blue indicator light goes off.

Pull and release the headlight control switch

flash the headlight high beams on and off.

FOG LIGHT SWITcH (if so equipped)

The headlights must be on and the low beams

selected for the fog lights to operate.

Turn the switch (inside collar) to the position

turn the fog lights on.

Turn the switch (inside collar) to the OFF position to

turn the fog lights off.

LANE cHANGE SIGNAL
To signal a lane change, move the lever up or down to the point where the indicator light

begins to flash, but the lever does not latch.

The turn signal will flash 3 times automatically.

For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi

1490690_14_Quest_QRG_072513.indd 13

7/25/13 9:24 AM