NISSAN 2015 Murano - Owner's Manual User Manual

Page 57

᭺

Top tether strap

᭺

Anchor point

Installing top tether strap

The child restraint top tether strap must be used
when installing the child restraint with the LATCH
lower anchor attachments.

First, secure the child restraint with the LATCH
lower anchors.

Rear bench seat

OUTBOARD SEATING POSITIONS

1. Remove the head restraint/headrest and

store it in a secure place. Be sure to reinstall
the head restraint/headrest when the child
restraint is removed. For additional informa-
tion, refer to “Head restraints/headrests” in
this section for head restraint/headrest ad-
justment, removal and installation informa-
tion.

2. Position the top tether strap

᭺

over the

seatback.

3. Secure the tether strap to the tether anchor

point

᭺

on the back side of the seatback

behind the child restraint.

4. Tighten the tether strap according to the

manufacturer’s instructions to remove any
slack.

CENTER SEATING POSITION

1. Remove the head restraint/headrest and

2. Position the top tether strap

᭺

over the

seatback.

3. Secure the tether strap to the tether anchor

point

᭺

on the back side of the seatback

behind the child restraint.

4. Tighten the tether strap according to the

manufacturer’s instructions to remove any
slack.

If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.

WARNING

Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used to at-
tach adult seat belts, or other items or
equipment to the vehicle. Doing so could
damage the child restraint anchorages.
The child restraint will not be properly
installed using the damaged anchorage,
and a child could be seriously injured or
killed in a collision.

Rear bench seat

LRS2597

1-38

Safety—Seats, seat belts and supplemental restraint system