NISSAN 2015 Murano - Owner's Manual User Manual
Page 40
Attaching the center seat belt
Always be sure the center seat belt connector
tongue and connector buckle are attached. Dis-
connect only when folding down the rear seat.
To connect the buckle:
1. Pull out the connector tongue from the re-
tractor base
᭺
1
.
2. Pull out the seat belt tongue from the retrac-
tor base
᭺
2
.
3. Pull the seat belt and secure the connector
buckle until it clicks
᭺
3
.
The center seat belt connector tongue can be
attached only into the rear center seat belt con-
nector buckle.
To fasten the seat belt, refer to
ЉFastening the
seat belts
Љ in this section.
WARNING
● Do not unfasten the rear center seat
belt connector except when folding
down the rear seat.
● When attaching the rear center seat belt
connector, be certain that the seat-
backs are completely secured in the
latched position and the rear center
seat
belt
connector
is
completely
secured.
● If the rear center seat belt connector
and the seatbacks are not secured in
the correct position, serious personal
injury may result in an accident or sud-
den stop.
LRS2531
Safety—Seats, seat belts and supplemental restraint system
1-21