Braking screen -19 – NISSAN 2015 GT R - Multi Function Display Owner's Manual User Manual

Page 254

BRAKING SCREEN

The braking screen displays the results of how
the vehicle behaves based on the manner in
which the driver operates the vehicle. The
information displayed is for confirmation pur-
poses. The results of how the brake pedal is
used are displayed as a timeline of g-force
exerted on the vehicle during deceleration. Use
the information to improve your operation of the
brake pedal.

WARNING

. Use the information from the multi

function meter strictly as a refer-
ence to make your driving more
comfortable. The readings are not
meant to prevent accidents caused
by reckless driving or poor driving
conditions (due to weather, road
condition, etc.). Always obey all
traffic regulations and posted speed
limits.

. Red zone readings are configured to

function only as a guide for smooth
driving. The readings are not in-
tended to prevent accidents caused
by reckless driving.

How to view the screen

BRAKE G (timeline graph):
Displays the deceleration of the g-force being
exerted on the vehicle. The vertical readout
illustrates the progress of deceleration and the
horizontal readout tracks the deceleration time-
line of the past 20 seconds.

Red zone display:
The color of the graph will change when the level
of g-force exerted on the vehicle while decelerat-
ing exceeds a preset level.

G-meter:
Displays the g-force currently being exerted due
on the vehicle due to deceleration.

SPEED:
Displays the current driving speed.

BRAKE PEDAL:
Displays the brake pedal position.

INFO:

. The reading that the brake meter displays

when the pedal is being depressed may
vary, depending on the vehicle speed and
road conditions. The brake meter may not
display a reading of “100%” even when the
brake is being fully depressed. This is not a
malfunction.

. This panel only displays acceleration infor-

mation when the vehicle is decelerating. It
does not display any acceleration informa-
tion when the vehicle is accelerating.

. Due to the slope of a road, this meter may

. When the VDC or the ABS is activated, a

mark will appear on the far left side of the
panel (large panel only).

. The scale of the readout is adjusted auto-

matically to accommodate readings that
exceed the upper limit of the meter.

Multi function meter

10-19