NISSAN 2012 GT R - Owner's Manual - Manual (Page 298)

Black plate (301,1)
R35-D EDITED: 2011/ 2/ 4
rigid side wall. Special techniques and
equipment are therefore required when
replacing these tires. NISSAN recom-
mends that tire replacement be per-
formed at a GT-R certified NISSAN
dealer.
. Specific tire changing equipment must
be used to remove the GT-R tires from
the wheel and to install the GT-R tires
onto the wheel. It is only possible to
reuse the tires when they have no
cracks and/or deformations on the
bead portion of the tire. If the incorrect
equipment is used to remove the GT-R
tires from the wheel and to install the
GT-R tires onto the wheel, cracks and
deformation may occur on the bead
portion of the tires meaning that the
tires cannot be reused. Contact a GT-R
certified dealer if the tires need to be
removed from the wheels
TIRE AND LOADING INFORMATION LABEL
*
1 Seating capacity: The maximum number
of occupants that can be seated in the
vehicle.
*
2 Vehicle load limit: See the following
section. (
“Vehicle loading informa-
tion” page 9-15)
*
3 Original size: The size of the tires
originally installed on the vehicle at the
factory.
Maintenance and do-it-yourself 8-33