NISSAN 2012 GT R - Owner's Manual - Manual (Page 218)

Black plate (221,1)
R35-D EDITED: 2011/ 2/ 4
1. Transmission setup switch
2. Suspension setup switch
3. Vehicle Dynamic Control (VDC) setup switch
HOW TO SWITCH THE MODES
Each time the engine is started, all switches are
set to the normal mode. The normal mode is
recommended for normal driving. Move the
VDC, transmission and suspension setup
switches up or down to change the mode when
the engine is running.
: Push and hold the switch for longer than approximately 1 second
: Push the switch
* The selected mode is maintained even if the shift lever is moved between
&
A and
&
M position.
Starting and driving 5-25