NISSAN 2012 GT R - Owner's Manual User Manual

Page 204

Black plate (207,1)

R35-D EDITED: 2011/ 2/ 4

NOTE:
. If the steering lock release malfunction

indicator appears on the vehicle infor-
mation display when the ignition
switch is pressed, press the ignition
switch again while gently turning the
s t e e r i n g

w h e e l

l e f t

a n d

r i g h t .

(

“Steering lock release malfunc-

tion indicator” page 2-42)

. If the shift

warning appears on the

vehicle information display when the
ignition switch is pushed, the shift lever
is in any position except the

posi-

tion. Move the shift lever to the

position. (

“Shift “P” warning”

page 2-41)

. If the Intelligent Key battery discharge

indicator appears on the vehicle infor-
mation display, the Intelligent Key
battery is discharged and the ignition
switch will not operate. Insert the
Intelligent Key into the key port to
o p e r a t e

t h e

i g n i t i o n

s w i t c h .

(

“Intelligent Key battery discharge

indicator” page 2-43)

. When all of the following conditions

are met for 60 minutes, the battery
saver system will cut off the power
supply to prevent battery discharge.

— The ignition switch is in the ACC

position, and

— All doors are closed, and
— The shift lever is in the

position.

. Do not leave the vehicle with the

ignition switch in the ACC or ON
position when the engine is not run-
ning for an extended period of time.
This can discharge the battery.

EMERGENCY ENGINE SHUT OFF

To shut off the engine in an emergency situation
while driving, perform the following procedure:
. Rapidly push the push-button ignition switch

3 consecutive times.

. Push and hold the push button ignition

switch for more than 2 seconds.

INTELLIGENT KEY BATTERY DIS-
CHARGE

If the battery of the Intelligent Key is almost
discharged, the guide light

of the Intelligent

Key port blinks and the indicator appears on the
vehicle information display. (

“Intelligent Key

insertion indicator” page 2-42)
In this case, inserting the Intelligent Key into the
port allows you to start the engine. Make sure
that the mechanical key side faces backward as
illustrated. Insert the Intelligent Key in the port
until it is latched and secured.
To remove the Intelligent Key from the port, push
the ignition switch to the OFF position and pull

Starting and driving

5-11