NISSAN 2013 Cube - Owner's Manual - Manual (Page 154)

Black plate (152,1)
[ Edit: 2012/ 7/ 19 Model: Z12-D ]
4-12 Center display, heater, air conditioner, audio and phone systems
SAA3440
Backing up near a projecting object
The vehicle may seem to nearly clear the object
in the display. However, the vehicle may hit the
object if it projects over the actual backing up
course.
SAA3569
Backing up behind a projecting object
The position *
C is shown further than the
position *
B in the display. However, the
position *
C is actually at the same distance
as the position *
A . The vehicle may hit the
object when backing up to the position *
A if
the object projects over the actual backing up
course.
HOW TO ADJUST THE SCREEN
The brightness can be adjusted by performing
the following procedure.
1. Push the SETUP button and then select the
“System” key.
2. Select the “Display” key. The “Brightness”
key is displayed.
3. Select the preferred brightness level.
OPERATING TIPS
. When the shift/selector lever is shifted to
the R (Reverse) position, the monitor screen
automatically changes to the RearView
Monitor mode. However, the radio can be
heard.
. When the view is switched, the display
images on the screen may be displayed with
some delay.
. When the temperature is extremely high or
low, the screen may not clearly display
objects. This is not a malfunction.
. When strong light is directly coming on the
camera, objects may not be displayed
clearly. This is not a malfunction.
. Vertical lines may be seen in objects on the
screen. This is due to strong reflected light
from the bumper. This is not a malfunction.
Condition: