Map lights -38 map light control switch -38 – NISSAN 2013 Cube - Owner's Manual User Manual
Page 112

Black plate (110,1)
[ Edit: 2012/ 7/ 19 Model: Z12-D ]
2-38
Instruments and controls
SIC4572
MAP LIGHTS
Operate the map light switch to turn the map
light on or off.
*
1
: ON position
*
2
: OFF position
SIC4573
MAP LIGHT CONTROL SWITCH
The map lights control switch has three posi-
tions: ON
*
1
, OFF
*
2
and center.
ON position
When the switch is in the ON position
*
1
, the
map lights will illuminate.
OFF position
When the switch is in the OFF position
*
2
, the
map lights will not illuminate, regardless of the
condition.
Center position
When the switch is in the center position, the
map lights will illuminate under the following
conditions:
.
ignition switch is placed in the OFF position
(models with Intelligent Key system)
— remain on for about 15 seconds.
.
the key is removed from the ignition switch
(models without Intelligent Key system)
— remain on for about 15 seconds.
.
doors are unlocked by pushing the UN-
LOCK
button (on the keyfob or
Intelligent Key) or the request switch (In-
telligent Key system equipped model), with
the ignition switch in the LOCK position
— remain on for about 15 seconds.
.
any door is opened and then closed with the
ignition switch in the LOCK position
— remain on for about 15 seconds.
.
any door is opened with the ignition switch
in the ACC or ON position
— remain on while the door is opened.
When the door is closed, the lights go
off.
The lights will turn off after a period of
time when the lights remain illuminated to
prevent the battery from becoming dis-
charged.
Condition: