beautypg.com

Child restraint installation using the seat, Belts -23 – NISSAN 2009 Altima Hybrid - Owner's Manual User Manual

Page 50

background image

4. After attaching the child restraint, test it be-

fore you place the child in it. Push it from side

to side while holding the seat near the

LATCH attachment path. The child restraint

should not move more than 1 inch (25 mm),

from side to side. Try to tug it forward and

check to see if the LATCH attachment holds

the restraint in place. If the restraint is not

secure, tighten the LATCH attachment as

necessary, or put the restraint in another

seat and test it again. You may need to try a

different child restraint. Not all child re-

straints fit in all types of vehicles.

5. Check to make sure the child restraint is

properly secured prior to each use. If the

child restraint is loose, repeat steps 2

through 4.

CHILD RESTRAINT INSTALLATION

USING THE SEAT BELTS

WARNING

Even with the NISSAN Advanced Air

Bag System, never install a rear-facing

child restraint in the front passenger

seat. Front air bags inflate with great

force. A rear-facing child restraint could

be struck by the front air bag in a crash

and could seriously injure or kill your

child.

Rear-facing – step 4

LRS0674

WRS0256

Safety—Seats, seat belts and supplemental restraint system

1-23

REVIEW COPY—

2009 Altima Hybrid Electric

(ahv)
Owners Manual—Canadian_French (fr_can)
06/14/08—debbie