Fog light operation, Turn signal switch, High beam – NISSAN 2008 Altima Hybrid - Quick Reference Guide User Manual
Page 8

FOG LIGHT OPERATION
NOTE: The headlights must be on and the low beams selected for the fog lights to operate.
Ⅲ Turn the switch (inside collar)
to the
position to turn on the fog lights.
Ⅲ Turn the switch (inside collar)
to the OFF position to turn off the fog lights.
TURN SIGNAL SWITCH
Ⅲ Move the headlight control switch up or down
to signal a turning direction. When the turn is com-
pleted, the turn signals cancel automatically.
Ⅲ To signal a lane change, move the headlight control
switch up or down
to the point where the
indicator light begins to flash, but the headlight con-
trol switch does not latch.
HIGH BEAM
Ⅲ Push the headlight control switch forward
to
select the high beam function. The blue
indica-
tor light illuminates. Pull the headlight switch back to
the original position to select the low beam. The
blue
indicator light goes off.
Ⅲ Pull and release the headlight control switch
to
flash the headlight high beams on and off.
STEERING WHEEL SWITCHES FOR AUDIO CONTROL/
BLUETOOTH
ா (if so equipped)
Ⅲ Press the SOURCE button to turn the radio sys-
tem on.
Ⅲ To choose Preset A, B, C, CD or AUX, press
SOURCE repeatedly.
Ⅲ The tune up or down
switch can be used to
perform the following:
● Push the
switch for less than 1.5 seconds to
change to a preset station.
● Push and hold the
switch for more than 1.5 seconds to seek to the next or previous
broadcasting radio station.
● Push the
switch while playing a CD (if so equipped) for less than 1.5 seconds to
change tracks on the CD.
● If the vehicle is equipped with a CD changer, push and hold the
switch for more
than 1.5 seconds to change between CDs.
Ⅲ Push the + or – control switch to increase or decrease the volume.
6