NISSAN 2008 Altima Hybrid - Quick Reference Guide - Manual (Page 21)

BLUETOOTH
ா HANDS-FREE PHONE SYSTEM (Navigation System
only – if so equipped)
With an overhead microphone and sound
transmitted through the audio system speaker,
the Bluetooth
ா Hands-Free Phone System
utilizes Bluetooth
ா wireless technology,
touch-screen, and voice recognition to pro-
vide hands-free cellular phone communica-
tion.
SYSTEM OPERATING TIPS
Ⅲ Close all windows. Surrounding noises
may interfere with system operation and
performance.
Ⅲ Press the
button on the steering wheel to activate voice recognition.
Ⅲ Wait for the “Please say a command” prompt and the listening tone before speaking.
Ⅲ Begin speaking a command within 1.5 seconds of the listening tone.
Ⅲ To cancel a voice recognition session, press and hold the
button or press the
button.
Ⅲ To increase or decrease the volume of the voice prompts, push the + or – (volume)
control buttons on the steering wheel or turn the VOL (volume) knob on the audio system
while the system is responding.
Ⅲ Speak in a clear and natural voice without pausing between words.
Ⅲ Some commands are not available while the vehicle is in motion.
Ⅲ The “Help” command will bring up the voice recognition command list.
Ⅲ For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.
PAIRING YOUR PHONE
Before using the hands-free feature, you need to set-up, or pair, the system to recognize your
cellular phone(s). Up to 5 Bluetooth
ா-enabled phones can be paired to this system. After the
initial one-time set-up, the system automatically connects with a paired phone when the
ignition switch is in the ACC or ON position, as long as the phone is in range and within the
vehicle cabin.
PAIRING PROCEDURE
NOTE: The vehicle must be stationary when pairing
the phone.
INITIAL PAIRING
NOTE: This procedure can only be used to pair the
first phone to the system.
1. Press the button on the steering wheel.
2. A message is displayed. Press the button again.
19