Maintenance and specifications – FORD 2002 Mustang v.1 User Manual

Page 251

Add 118 ml (4 oz.) of Additive Friction Modifier

C8AZ-19B546-A or equivalent meeting Ford
specification EST-M2C118-A for complete refill of
Traction-Lok axles.

Ford design rear axles contain a synthetic lubricant
that does not require changing unless the axle has
been submerged in water.

Ensure the correct automatic transmission fluid is

used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON

௡

and MERCON

௡ V are not interchangeable. DO NOT

mix MERCON

௡ and MERCON௡ V. Refer to your

scheduled maintenance guide to determine the
correct service interval.

ENGINE DATA

Engine

3.8L OHV V6
engine

4.6L SOHC V8
engine

Cubic inches

232

281

Required fuel

87 octane

Firing order

1-4-2-5-3-6

1-3-7-2-6-5-4-8

Spark plug gap

1.3-1.4 mm
(0.052-00.056
inch)

Ignition system

EDIS

Coil on plug

Compression ratio

9.4:1

VEHICLE DIMENSIONS

Vehicle
dimensions

Coupe mm (in)

Convertible mm
(in)

(1) Overall length

4 653.3 (183.2)

(2) Overall width

1 856.7 (73.1)

(3) Overall height

1 348.7 (53.1)

1 351.3 (53.2)

(4) Wheelbase

2 573.0 (101.3)

(5) Track - Front

1 534.2 (60.4)

(5) Track - Rear

1 539.2 (60.6)

1 521.5 mm (59.9 in) for Mustang GT

1 526.5 mm (60.1 in) for Mustang GT

Maintenance and Specifications

251