FORD 2002 Mustang v.1 - Manual (Page 248)

Fluid Ford Part
Name Application Capacity
Fuel tank N/A All 59.4L
(15.7 gallons)
Transmission
fluid
3
Motorcraft
MERCON
௡V
ATF
Automatic
with 3.8L
OHV V6
engine 13.1L
(13.9 quarts)
4
Automatic
with 4.6L
SOHC V8
engine 12.0L
(12.8 quarts)
4
Motorcraft
MERCON
௡
ATF
Manual with
3.8L OHV V6
engine 2.6L
(5.6 pints)
5
Synthetic
MERCON
௡
ATF
Manual with
4.6L SOHC
V8 engine 3.8L
(8.0 pints)
5
Windshield
washer fluid Ultra-Clear
Windshield
Washer
Concentrate All 3.8L
(4.0 quarts)
1 Add the coolant type originally equipped in your
vehicle.
2 Rear axle lubricants do not need to be checked or
changed unless a leak is suspected, service is
required or the axle assembly has been submerged
in water. The axle lubricant should be changed any
time the rear axle has been submerged in water. Fill
6 mm to 14 mm (1/4 inch to 9/16 inch) below
bottom of fill hole. Add 118 ml (4 oz.) of Additive
Friction Modifier C8AZ-19B546-A or equivalent
meeting Ford specification EST-M2C118–A for
complete refill of Traction-Lok axles.
3 Ensure the correct automatic transmission fluid is
used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON
௡
and MERCON
௡ V are not interchangeable. DO NOT
mix MERCON
௡ and MERCON௡ V. Refer to your
scheduled maintenance guide to determine the
correct service interval.
Maintenance and Specifications
248