beautypg.com

Maintenance and specifications – FORD 2002 F-150 v.1 User Manual

Page 284

background image

During normal operation, the fluid level in the clutch reservoir should
remain constant. If the fluid level drops, refill the fluid level to the step
in the reservoir.

Use only a DOT 3 brake fluid designed to meet Ford specification
ESA-M6C25–A. Refer to Lubricant Specifications in this chapter.

Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes
with running water for 15 minutes. Seek medical attention if

irritation persists. If taken internally, drink water and induce vomiting.
Seek medical attention immediately.

1. Clean the reservoir cap before
removal to prevent dirt and water
from entering the reservoir.

2. Remove cap and rubber
diaphragm from reservoir.

3. Add fluid until the level reaches
the step in the reservoir.

4. Reinstall rubber diaphragm and
cap onto reservoir.

TRANSMISSION FLUID

Checking automatic transmission fluid (if equipped)

Refer to your scheduled maintenance guide for scheduled intervals for
fluid checks and changes. Your transmission does not consume fluid.
However, the fluid level should be checked if the transmission is not
working properly, i.e., if the transmission slips or shifts slowly or if you
notice some sign of fluid leakage.

Maintenance and Specifications

284