FORD 2003 Mustang v.2 - Manual (Page 46)

increase the vehicle set speed in small amounts
by 1.6 km/h (1 mph).
• Use the accelerator pedal to get to the desired
speed. When the vehicle reaches that speed press
and release the SET ACCEL control.
Reducing speed while using speed control
There are two ways to
reduce a set speed:
• Press and hold the
COAST control until
you get to the
desired speed, then
release the control.
You can also use the
COAST control to operate the Tap-Down function.
Press and release this control to decrease the
vehicle set speed in small amounts by 1.6 km/h
(1 mph).
• Depress the brake
pedal until the
desired vehicle
speed is reached,
press the SET
ACCEL control.
Turning off speed control
There are two ways to turn off the speed control:
• Depress the brake pedal or the clutch pedal (if
equipped). This will not erase your vehicles
previously set speed.
• Press the speed
control OFF control.
Note: When you turn
off the speed control or
the ignition, your speed
control set speed
memory is erased.
RESUME
SET
ACCEL
COAST
RESUME
SET
ACCEL
COAST
OFF
ON
Driver Controls
46