FORD 2003 Mustang v.2 - Manual (Page 45)

3. Press the SET
ACCEL control and
release it.
4. Take your foot off
the accelerator pedal.
Note:
• Vehicle speed may vary momentarily when driving
up and down a steep hill.
• If the vehicle speed increases above the set speed
on a downhill, you may want to apply the brakes
to reduce the speed.
• If the vehicle speed decreases more than 16 km/h
(10 mph) below your set speed on an uphill, your
speed control will disengage.
Resuming a set speed
Press the RESUME
control and release it.
This will automatically
return the vehicle to
the previously set
speed. The RESUME
control will not work if
the vehicle speed is not
faster than 48 km/h (30 mph).
Increasing speed while using speed control
There are two ways to
set a higher speed:
• Press and hold the
SET ACCEL control
until you get to the
desired speed, then
release the control.
You can also use the
SET ACCEL control to operate the Tap-Up
function. Press and release this control to
RESUME
SET
ACCEL
COAST
RESUME
SET
ACCEL
COAST
RESUME
SET
ACCEL
COAST
Driver Controls
45