Maintenance and specifications – FORD 2003 Mustang v.2 User Manual
Page 204
Item
Ford part
name
Ford part
number
Ford
specification
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
ZC-32–A
WSB-M8B16–A2
1
Add 118 ml (4 oz.) of Additive Friction Modifier
XL-3 or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok
axles.
Ford design rear axles contain a synthetic lubricant
that does not require changing unless the axle has
been submerged in water.
2
Ensure the correct automatic transmission fluid is
used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON
and MERCON
V are not interchangeable. DO NOT
mix MERCON
and MERCON V. Refer to your
scheduled maintenance guide to determine the
correct service interval.
ENGINE DATA
Engine
3.8L OHV
V6 engine
4.6L SOHC
V8 engine
4.6L 4v V8
engine
(Mach 1)
Cubic inches
232
281
281
Required fuel
87 octane
87 octane
91 Octane
Firing order
1-4-2-5-3-6
1-3-7-2-6-5-4-8 1-3-7-2-6-5-4-8
Spark plug
gap
1.3-1.4 mm
(0.052-00.056
inch)
1.3-1.4 mm
(0.052-00.056
inch)
1.3-1.4 mm
(0.052-00.056
inch)
Ignition
system
EDIS
Coil on plug
Coil on plug
Compression
ratio
9.4:1
9.4:1
10.0:1
Maintenance and Specifications
204