beautypg.com

Locks and security – FORD 2004 Explorer v.2 User Manual

Page 83

background image

2. Press

and release again within three seconds to confirm that all the

doors are closed and locked. Note: The doors will lock again, the horn
will chirp and the lamps flash once.

Opening the liftgate window

Press

to unlatch the liftgate window.

Sounding a panic alarm

Press

to activate the alarm. The horn will sound for a maximum of

30 seconds and the parklamps will flash for a maximum of 3 minutes.
Press again or turn the ignition to ON to deactivate, or wait for the alarm
to timeout in 3 minutes.

Note: The panic alarm will only operate when the ignition is in the OFF
or ACC position.

Memory seats/adjustable pedals/easy entry-exit feature
(if equipped)

The remote entry system can also control the memory seat /adjustable
pedals/easy entry-exit feature.

Press

to automatically move the seat and adjustable pedals to the

desired memory position (the seat position corresponds to the
transmitter being used).

Activating the memory seat feature

To activate this feature:

1. Position the seat and adjustable pedals to the position desired.

2. Press the SET control on the
driver’s door panel.

3. Within 5 five seconds, press one
control on the remote transmitter
and then press the 1 or 2 control on
the driver’s door panel to which you
would like to associate with the seat
and Driver 1 or Driver 2 positions.

4. Repeat this procedure for another
remote transmitter if desired.

Deactivating the memory seat feature

To deactivate this feature:

1. Press the SET control on the driver’s door panel.

SET

1

2

2004 Explorer (exp)
Owners Guide (post-2002-fmt)
USA English
(fus)

Locks and Security

83