beautypg.com

Driver controls – FORD 2004 Explorer v.2 User Manual

Page 73

background image

Warning display

Status

Check tire pressure (if
equipped)

Warning returns after the ignition key
is turned from OFF to ON.

Tire pressure monitor fault (if
equipped)

Tire pressure sensor fault (if
equipped)

Check AdvanceTrac

௢ (if

equipped)

Advtrac off t/c on (if equipped)

Low washer fluid level

Door ajar

Change oil soon

Oil change required

CHECK ENGINE TEMPERATURE. Displayed when the engine
coolant is overheating. Stop the vehicle as soon as safely possible, turn
off the engine and let it cool. Check the coolant and coolant level. Refer
to Engine coolant in the Maintenance and specifications chapter. If
the warning stays on or continues to come on, contact your dealer as
soon as possible.

TRANSMISSION OVERHEATED. Indicates the transmission is
overheating. This warning may appear when towing heavy loads or when
driving in a low gear at a high speed for an extended period of time.
Stop the vehicle as soon as safely possible, turn off the engine and let it
cool. Refer to Transmission fluid in the Maintenance and
specifications
chapter. If the warning stays on or continues to come on,
contact your dealer for transmission service as soon as possible.

CHECK TRANSMISSION. Indicates the transmission is not operating
properly. If this warning stays on, contact your dealer as soon as
possible.

LOW FUEL LEVEL. Displayed as an early reminder of a low fuel
condition.

CHECK FUEL CAP. Displayed when the fuel filler cap is not properly
installed. Check the fuel filler cap for proper installation. Refer to Fuel
filler cap
in the Maintenance and specifications chapter.

ETC-ENGINE FAILSAFE MODE. Displayed when the engine has
defaulted to a “limp-home” operation. If the warning stays on or
continues to come on, contact your dealer as soon as possible.

2004 Explorer (exp)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driver Controls

73