Instrument cluster – FORD 2007 Explorer Sport Trac v.1 User Manual
Page 19
Never remove the coolant reservoir cap while the engine is
running or hot.
Odometer: Registers the total miles (kilometers) of the vehicle.
• Standard instrument cluster
• Optional instrument cluster
Refer to Message Center in the
Driver Controls chapter on how to
switch the display from English to
Metric.
Trip odometer: Registers the miles (kilometers) of individual journeys.
• Standard instrument cluster
Press the TRIP/RESET control once
to switch from the odometer to the
TRIP A feature. Press the control
again to select the TRIP B feature.
To reset the trip, press and hold the
control again until the trip reading is 0.0 miles.
• Optional instrument cluster
Press and release the message
center INFO button until TRIP A
mode appears in the display. Press
the control again to select the TRIP
B feature. Press the RESET button
to reset.
Note: Outside Air Temperature will
only be displayed in the Instrument Cluster Message Center on vehicles
with manual climate control.
2007 07+ Explorer Sport Trac (esp)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
19