beautypg.com

Climate controls – FORD 2010 Escape v.1 User Manual

Page 50

background image

5.

Power/

: Press to activate/deactivate the climate control

system. When the system is off, outside air is prevented from entering
the vehicle through the vents. Turn to manually increase/decrease the
fan speed. The manual fan speed setting will appear on the left side of
the display. Press AUTO to return to full automatic control.

6.

: Distributes air through the instrument panel vents. Press AUTO

to return to full automatic control.

7.

: Distributes air through the instrument panel vents, demister

vents, floor vents and rear seat floor vents. Press AUTO to return to full
automatic control.

8.

: Distributes air through the demister vents, floor vents and rear

seat floor vents. Press AUTO to return to full automatic control.

9. Pass Temp (passenger temperature): Press to engage/disengage
separate passenger side temperature control. Turn to increase/decrease
the temperature on the passenger side of the vehicle. The recommended
initial setting is between 72°F (22°C) and 75°F (24°C), then adjust for
comfort. The passenger side temperature setting will appear in the upper
right corner of the display.

10.

Passenger heated seat control (if equipped): Press to

activate/deactivate the passenger heated seat. See Heated seats in the
Seating and Safety Restraints chapter.

11.

Recirculated air: Press to activate/deactivate air recirculation

in the vehicle. Recirculated air may reduce the amount of time needed to
cool down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculated air engages
automatically when MAX A/C is selected or can be engaged manually in
any airflow mode except

(defrost). Recirculated air may turn off

automatically in some airflow modes to reduce fog potential. When the
ignition switch is turned off and back on, the climate system will return
to the recirculated air mode only if the A/C button LED is illuminated
and the air distribution selection is either AUTO,

(panel) or

(panel/floor).

12. MAX A/C: Distributes recirculated air through the instrument panel
vents to cool the vehicle. This re-cooling of the interior air is more
economical and efficient. Recirculated air may also help reduce
undesirable odors from entering the vehicle. Press the MAX A/C button
again for normal A/C operation.

Climate Controls

50

2010 Escape (204)
Owners Guide, 1st Printing
USA
(fus)