beautypg.com

Fuel pump shut-off switch, Fuses and relays, Fuses – FORD 2010 Escape v.1 User Manual

Page 248: Roadside emergencies

background image

Note: With extended use, the flasher may run down your battery.

FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.

This switch is located in the front
passenger’s footwell, behind a
flip-up cover, by the kick panel
access cover.

To reset the switch:

1. Turn the ignition to the off
position.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.

4. Turn the ignition to the on
position.

5. Wait a few seconds and return
the key to the off position.

6. Make another check for leaks.

FUSES AND RELAYS

Fuses

If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note: Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.

15

Roadside Emergencies

248

2010 Escape (204)
Owners Guide, 1st Printing
USA
(fus)