FORD 2010 Escape v.1 - Manual (Page 119)

To reinstall the adjustable head restraint, do the following:
1. Insert the two stems into the
guide sleeve collars.
2. Push the head restraint down
until it locks.
Properly adjust the head restraint so that the top of the head restraint is
even with the top of your head and positioned as close as possible to the
back of your head. For occupants of extremely tall stature, adjust the
head restraint to its full up position.
WARNING: To minimize the risk of neck injury in the event of a
crash, head restraints must be installed properly.
Folding down second row seats
1. Remove the second row head restraint. See Second row adjustable
head restraints in this chapter.
Note: Place the head restraint underneath the back of the front seat
for storage.
2. Pull the seat release strap.
Note: Make sure the floor is clear of all objects before folding the seat.
Seating and Safety Restraints
119
2010 Escape (204)
Owners Guide, 1st Printing
USA (fus)