Locks and security – FORD 2010 Escape v.1 User Manual
Page 109

Troubleshooting
Condition
Potential Causes
Can’t create a MyKey™
• Key in the ignition is already a
MyKey™
• Key in the ignition is the last remaining
Admin key (there always has to be at
least one Admin key)
• SecuriLock Passive Anti-Theft System
is disabled or in unlimited mode
• Vehicle has been started using a remote
start system that is programmed as
MyKey™. Refer to Using MyKey™ with
Remote Start Systems section.
Cannot program the
MyKey™ optional settings
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™
section
• Vehicle has been started using a remote
start system that is programmed as
MyKey™. Refer to Using MyKey™ with
Remote Start Systems section.
Cannot disable MyKey™
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™
section
• Vehicle has been started using a remote
start system that is programmed as
MyKey™. Refer to Using MyKey™ with
Remote Start Systems section.
Lost the only Admin key
• Purchase a new key from your
authorized dealer
Lost any key
• For programming spare keys, refer to
the Programming spare keys section in
this chapter.
Locks and Security
109
2010 Escape (204)
Owners Guide, 1st Printing
USA (fus)