beautypg.com

Child booster seats, Seating and safety restraints – FORD 2010 Crown Victoria v.1 User Manual

Page 137

background image

2. Locate the correct anchor for the
selected seating position.

3. Open the tether anchor cover.

4. Clip the tether strap to the
anchor as shown.

If the tether strap is clipped
incorrectly, the child safety seat may
not be retained properly in the
event of a collision.

5. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.
If the safety seat is not anchored properly, the risk of a child being
injured in a collision greatly increases.
If your child restraint system is equipped with a tether strap, and the
child restraint manufacturer recommends its use, Ford also recommends
its use.

Child booster seats
The belt-positioning booster (booster seat) is used to improve the fit of
the vehicle safety belt. Children outgrow a typical child seat (e.g.,
convertible or toddler seat) when they weigh about 40 lb (18 kg) and are
around four (4) years of age. Consult your child safety seat owner guide
for the weight, height, and age limits specific to your child safety seat.
Keep your child in the child safety seat if it properly fits the child,
remains appropriate for their weight, height and age AND if properly
secured to the vehicle.

Seating and Safety Restraints

137

2010 Crown Victoria (cro)
Owners Guide, 1st Printing
USA
(fus)