Global open windows (if equipped), Bounce-back, Security override – FORD 2011 Fusion v.2 User Manual
Page 82: Window lock, Driver controls
Global open windows (if equipped)
Press and hold
on the remote transmitter to begin opening the two
front windows and (if equipped) vent the moon roof.
• The
control can then be released and the windows will complete
the opening operation and fully vent the moon roof.
• If
or
is pressed during the opening operation, both windows
and moon roof movement will stop.
Note: The ignition must be in the off position and the accessory delay
feature must be not activated in order for this feature to operate.
Note: To disable this feature, contact your authorized dealer.
Bounce-back
When an obstacle has been detected in the window opening as the
window is moving upward, the window will automatically reverse
direction and move down. This is known as “bounce-back”. If the ignition
is turned off (without accessory delay being active) during bounce-back,
the window will move down until the bounce-back position is reached.
Security override
To override a bounce-back condition, within two seconds after the
window reaches the bounce-back position, pull and hold the switch up
and the window will travel up with no bounce-back or pinch
protection. If the switch is released before the window is fully closed,
the window will stop. For example, this can be used to overcome the
resistance of ice on the window or seals.
Window lock
The window lock feature allows only
the driver and front passenger to
operate the power windows.
To lock out all the window controls
(except for the driver and front
passenger) press the right side of
the control. Press the left side to
restore the window controls.
Driver Controls
82
2011 Fusion (fsn)
Owners Guide, 2nd Printing
USA (fus)