Power door locks, Smart locks, Locks – FORD 2011 Fusion v.2 User Manual
Page 103: Locks and security

Condition
Potential Causes
I accidentally
programmed all keys as
MyKeys™
• Vehicle has a remote start system that is
recognized as an admin key. Refer to the
Using MyKey™ with remote start systems
section to reset all MyKeys™ as admin keys.
MyKey™ programmed
total includes one
additional key
• Unknown key has been programmed to the
vehicle as a MyKey™.
• Vehicle is equipped with a remote start
system. Refer to Using MyKey™ with
remote start systems section.
Admin keys
programmed total
includes one additional
key
• Unknown key has been programmed to the
vehicle as admin key.
• Vehicle is equipped with a remote start
system. Refer to Using MyKey™ with
remote start systems section.
MyKey™ miles do not
accumulate
• MyKey™ is not being used by the intended
user.
• MyKey™ system has been recently cleared.
POWER DOOR LOCKS
• Press the
control to unlock all
doors.
• Press the
control to lock all
doors.
Smart locks
This feature attempts to help prevent you from locking yourself out of
the vehicle if your key is still in the ignition.
When you open one of the front doors and you lock the vehicle with the
power door lock control (on the driver or passenger door trim panel), all
the doors will lock, then all doors will automatically unlock reminding
you that your key is still in the ignition.
The vehicle can still be locked, with the key in the ignition, using the
manual lock control on the door, locking the driver’s door with a key, or
using the lock control on the remote entry transmitter portion of your
Integrated Keyhead Transmitter.
Locks and Security
103
2011 Fusion (fsn)
Owners Guide, 2nd Printing
USA (fus)