beautypg.com

Illuminated entry, Perimeter lamps illuminated entry, Locks and security – FORD 2011 Fusion v.2 User Manual

Page 112

background image

How to reprogram your integrated keyhead transmitters (IKTs)

To program a new integrated keyhead transmitter yourself, refer to
Programming spare keys in the SecuriLock

passive anti-theft system

section of this chapter. Note: At least two IKTs are required to perform
this procedure yourself.

Illuminated entry

The interior lamps and puddle lamps (if equipped) illuminate when the
Integrated Keyhead Transmitter is used to unlock the door(s).

The illuminated entry system will turn off the lights if:
• the ignition is turned to the on position,
• the Integrated Keyhead Transmitter lock control is pressed,
• The vehicle is locked using the keyless entry keypad (if equipped), or
• after 25 seconds of illumination.
The lights will not turn off if:
• they have been turned on with the dimmer control, or
• any door is open.

Perimeter lamps illuminated entry

With the Integrated Keyhead Transmitter system, the following items will
illuminate when the

control on the transmitter is pressed:

• Parking lamps
• Tail lamps
• Headlamps
The lamps will automatically turn off:
• if the ignition switch is turned to the 3 (on) position,
• The vehicle is locked using the keyless entry keypad (if equipped), or
• after 25 seconds of illumination.
Note: On some vehicles, the perimeter lamps illuminated entry feature
will not activate in daylight conditions.

Deactivating/activating perimeter lamps illuminated entry

You may enable/disable this feature by having your vehicle serviced by
your authorized dealer.

You may also perform the following power door lock sequence to
enable/disable the perimeter lamps feature. Note: Before starting, ensure

Locks and Security

112

2011 Fusion (fsn)
Owners Guide, 2nd Printing
USA
(fus)