FORD 2011 Fiesta v.1 - Manual (Page 80)

• Bluetooth Audio Note: This is a device dependent feature.
• SYNC Line In
• Return
Accessing and using your USB port
You can use the USB port to plug in and access media devices as well as
charge devices (if supported by your device). For a list of compatible
media players, refer to www.SyncMyRide.com.
Note: Since your USB port allows you to charge your device (if
supported by your device), SYNC
௡ will not automatically change media
modes when something is initially plugged into the USB port. To access
the USB port through your SYNC
௡ system:
Note: To scroll, press / .
1. Ensure that the desired device is plugged into the USB port and is
turned ON.
2. Press AUX repeatedly until SYNC appears.
3. Press MENU. When Media Player Menu is selected, press OK.
4. Scroll Select source is selected and press OK.
5. Scroll until SYNC USB is selected and press OK.
If the connected device and media content is supported, SYNC
௡ will
begin indexing available media files. If there are no readable media files
for SYNC
௡ to play, the display will indicate that no media is available. If
there are readable media files, Indexing may appear in the radio display.
If Autoplay is ON, SYNC
௡ gives you the ability to access media files
randomly as they are indexed. If Autoplay is OFF, indexed media is not
available until the indexing process is complete. The display will indicate
when indexing is complete and SYNC
௡ will take you to the Play Menu.
Note: The time required to complete the indexing process is dependent
upon the size of the media content being indexed.
Note: SYNC
௡ is capable of indexing thousands of average size media
files. SYNC
௡ will notify you once maximum indexing file size is reached.
If your playing device becomes disconnected from the USB port at
any time, the display will indicate that the USB was removed.
Entertainment Systems
80
2011 Fiesta (fie)
Owners Guide, 1st Printing
USA (fus)