beautypg.com

Locks and security – FORD 2011 F-150 v.1 User Manual

Page 139

background image

Troubleshooting

Condition

Potential Causes

Can’t create a
MyKey™

• Key in the ignition is already a MyKey™.

• Key in the ignition is the last remaining admin key
(there always has to be at least one admin key).

• SecuriLock௡ passive anti-theft system is disabled
or in unlimited mode.

• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey™. Refer to Using MyKey™
with remote start systems
section.

Cannot program
the MyKey™
optional settings

• Key in the ignition is a MyKey™.

• No MyKeys™ are programmed to the vehicle.
Refer to Create a MyKey™ section.

• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey™. Refer to Using MyKey™
with remote start systems
section.

Cannot clear
MyKey™

• Key in the ignition is a MyKey™ .

• No MyKeys™ are programmed to the vehicle.
Refer to Create a MyKey™ section.

• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey™. Refer to Using MyKey™
with remote start systems
section.

Lost the only
admin key

• Purchase a new key from your authorized dealer.

Lost any key

• For programming spare keys, refer to the
Programming spare keys section in this chapter.

I accidentally
programmed all
keys as
MyKeys™

• Vehicle has a non Ford-approved remote start
system that is recognized as an admin key. Refer to
the Using MyKey™ with remote start systems
section to reset all MyKeys™ as admin keys.

No MyKey™
function with (if
equipped)
intelligent access
key with push

• An admin intelligent access key is present at a
push-and-start vehicle.

• No MyKeys™ are programmed to the vehicle.
Refer to Create a MyKey™ section.

• Vehicle has been started using a non

Locks and Security

139

2011 F-150 (f12)
Owners Guide, 1st Printing
USA
(fus)