Setting the gap distance, Driver controls – FORD 2011 Edge v.3 User Manual
Page 95
The vehicle brakes will be automatically applied to slow the vehicle to
maintain a safe distance between the vehicle in front. The maximum
braking which is applied by the ACC system is limited and can be
overridden by the driver applying the brakes.
If the ACC system predicts that its
maximum braking level will not be
sufficient, an audible warning will
sound while the ACC continues to
brake. This is accompanied by a
heads-up display; a red warning bar
illuminating on the windshield. The driver should take immediate
action.
Note: The brakes may emit a sound when they are being modulated by
the adaptive cruise control system.
WARNING: Adaptive cruise control only warns of vehicles
detected by the radar sensor. In some cases there may be no
warning or the warning may be delayed. The driver should always
apply the brakes when necessary. Failing to do so may result in a
collision, serious injury or death.
Setting the gap distance
The distance between your vehicle
and the vehicle in front of you can
be decreased or increased by
pressing the GAP control up or
down. The selected gap will be
displayed in the message center as shown by the bars in the graphic.
Four gap distance settings are available.
Graphic
display (bars
between
vehicles)
Following
distance
Following
distance at
60 mph
(100 km/h)
Dynamic
behavior
1 bar
1 second
29 yards (28 m)
Sporty
2 bars
1.5 seconds
44 yards (42 m)
Normal
3 bars
1.9 seconds
56 yards (53 m)
Normal
4 bars
2.3 seconds
66 yards (64 m)
Comfort
Each time the vehicle is restarted, the last chosen gap for the current
driver will be automatically selected.
Driver Controls
95
2011 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)