Locks and security – FORD 2011 Edge v.3 User Manual
Page 119
Note: For all vehicles with a non Ford-approved remote start installed, it
is possible to program all ’real’ keys as MyKeys
, in which case, you will
need to use your remote start system to reset all MyKeys
as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your non Ford-approved remote start
fob.
3. Follow Steps 1-4 in the Clear MyKey
section.
Troubleshooting
Condition
Potential Causes
Can’t create a MyKey
• Key in the ignition is already a
MyKey
.
• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key).
• Intelligent access key (if equipped)
is not in the backup slot (for vehicles
with push button start).
• SecuriLock passive anti-theft
system is disabled or in unlimited
mode.
• Vehicle has been started using a
non Ford-approved remote start
system that is programmed as
MyKey
. Refer to Using MyKey with
remote start systems section.
Cannot program the MyKey
optional settings
• Key in the ignition is a MyKey.
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a
non Ford-approved remote start
system that is programmed as
MyKey
. Refer to Using MyKey with
remote start systems section.
Locks and Security
119
2011 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)