beautypg.com

Automatic disarming, Replacement keys, Programming spare keys – FORD 2011 Crown Victoria v.2 User Manual

Page 87: Locks and security

background image

Automatic disarming

Switching the ignition to the on position with a coded key disarms the
vehicle.
• The theft indicator on the instrument panel will illuminate for three

seconds and then go out.

• If the theft indicator stays on for an extended period of time or

flashes rapidly, contact your authorized dealer as soon as possible.

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,
you will need to have your vehicle towed to an authorized dealer. The
key codes need to be erased from your vehicle and new coded keys will
need to be programmed.

Replacing coded keys can be very costly. Store an extra programmed key
away from the vehicle in a safe place to help prevent any
inconveniences. Please visit an authorized dealer to purchase additional
spare or replacement keys.

Programming spare keys

A maximum of eight keys can be coded to your vehicle. Only
SecuriLock

௡ keys can be used. To program a coded key yourself, you

will need two previously programmed coded keys (keys that already
operate your vehicle’s engine) and the new unprogrammed key(s) readily
accessible for timely implementation of each step in the procedure.

If two previously programmed coded keys are not available, you must
bring your vehicle to your authorized dealer to have the spare coded
key(s) programmed.

Please read and understand the entire procedure before you begin.

1. Insert the first previously
programmed coded key into the
ignition and turn the ignition from 1
(off) to the 3 (on) position
(maintain ignition in 3 (on) for at
least one second).

2. Turn ignition to 1 (off) and
remove the first coded key from
the ignition.

4

3

2

1

Locks and Security

87

2011 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA
(fus)