beautypg.com

Replacing license plate lamp bulbs, Replacing backup lamp bulbs, Replacing high-mount brakelamp bulbs – FORD 2011 Crown Victoria v.2 User Manual

Page 59: Lights

background image

8. Carefully push the carpet back in to place and install the retainer.

Replacing license plate lamp bulbs

1. Make sure headlamp switch is in
the off position, then remove two
screws, grommets and the license
plate lamp assembly from the trunk
lid.

2. Carefully pull the bulb from the
socket and push in the new bulb.

3. Install the lamp assembly on
trunk lid with two grommets,
ensuring the grommets are pushed
all the way into the trunk lid and secure with two screws.

Replacing backup lamp bulbs

1. Open trunk and remove bulb
socket from the trunk lid by turning
counterclockwise.

2. Pull the bulb straight out of the
socket and push in the new bulb.

3. Install the bulb socket in trunk lid
by turning clockwise.

Replacing high-mount brakelamp bulbs

1. Remove two screws from the
lamp assembly.

2. Carefully lift the lamp assembly
up for access to the bulbs.

Lights

59

2011 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA
(fus)