beautypg.com

Safety belt extension assembly, Safety belt height adjustment, Seating and safety restraints – FORD 2012 Focus v.5 User Manual

Page 192

background image

Safety belt extension assembly

If the safety belt is too short when fully extended, a safety belt extension
assembly can be obtained from an authorized dealer.

Use only extensions manufactured by the same supplier as the safety
belt. Manufacturer identification is located at the end of the webbing on
the label. Also, use the safety belt extension only if the safety belt is too
short for you when fully extended.

WARNING: Do not use extensions to change the fit of the
shoulder belt across the torso.

Safety belt height adjustment

Adjust the height of the shoulder
belt so the belt rests across the
middle of your shoulder.

To adjust the shoulder belt height,
squeeze the button and slide the
height adjuster up or down. Release
the button and pull down on the
height adjuster to make sure it is
locked in place.

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the seat belt
and increase the risk of injury in a collision.

Seating and Safety Restraints

192

2012 Focus (foc)
Owners Guide, 5th Printing
USA
(fus)

This manual is related to the following products: