FORD 2012 Focus v.1 - Manual (Page 65)

Pairing subsequent phones
Once you have a phone paired with the system, the steps to pair another
phone is a bit different. To pair a subsequent phone:
Note: To scroll through the menus, press / .
1. Ensure that the vehicle ignition and radio are turned on and that
you are in P (Park).
2. Press PHONE or and scroll until System Settings is
selected.
3. Press OK and scroll until Bluetooth Devices is selected and press
OK.
4. Scroll until Add Bluetooth Device is selected and press OK.
5. When Find SYNC appears in the display, press OK.
6. Put your phone into Bluetooth discovery mode. Refer to your
phone’s user guide if necessary.
7. When prompted on your phone’s display, enter the six digit PIN
provided by SYNC in the radio display.
8. The display will indicate when the pairing is successful.
9. The system will then prompt with questions such as if you would
like to set the current phone as the primary phone (the phone
SYNC will automatically try to connect with first upon vehicle
start-up), download your phone book, turn on 911 Assist™ (if
available), etc.
Phone voice commands
Press and when prompted, say, “Phone”. You may then say any of
the following:
• Call 2 • Call at home 2
• Call on mobile OR cell 2
• Call at work OR Call
in office
2
• Call on other 2 • Dial* 2
• Phone book at home 1 • Phone book 1
• Phone book on mobile
OR cell
1
• Phone book at work OR
Phone book at office
1
Entertainment Systems
65
2012 Focus (foc)
Owners Guide, 1st Printing
USA (fus)