beautypg.com

Stripes or graphics (if equipped), Exterior chrome, Underbody – FORD 2013 Edge v.4 User Manual

Page 310: Cleaning plastic exterior parts, Vehicle care 309

background image

• Immediately remove items such as gasoline, diesel fuel, bird droppings

and insect deposits because they can cause damage to the vehicle’s
paintwork and trim over time. Use Motorcraft Bug and Tar Remover.

Note: Suntan lotions and insect repellents can damage any painted

surface; if these substances come in contact with your vehicle, wash it
off as soon as possible.

• Remove any exterior accessories before entering a car wash.

Stripes or Graphics (if equipped)

Do not use a commercial or high-pressure wand on the surface or edge
of stripes and graphics. This can cause damage to the film and cause the
edge of the film to peel away from the vehicle surface.

Exterior Chrome

Note: Never use abrasive materials such as steel wool or plastic pads as
they can scratch the chrome surface.

Note: Do not use chrome cleaner, metal cleaner or polish on wheels and
wheel covers.
• Wash the vehicle first, using cool or lukewarm water and a neutral pH

shampoo, such as Motorcraft Detail Wash.

• Use Motorcraft Custom Bright Metal Cleaner. Apply the product as

you would a wax to clean bumpers and other chrome parts; allow the
cleaner to dry for a few minutes, then wipe off the haze with a clean,
dry rag.

• Do not apply cleaning product to hot surfaces and do not leave

cleaning product on chrome surfaces for a period of time exceeding
that which is recommended.

Note: Using other non-recommended cleaners can result in severe

and permanent cosmetic damage.

Underbody

Flush the complete underside of your vehicle frequently. Keep body and
door drain holes free from packed dirt.

Cleaning Plastic Exterior Parts

Use only approved products to clean plastic parts.
• For routine cleaning, use Motorcraft Detail Wash.
• If tar or grease spots are present, use Motorcraft Bug and Tar

Remover.

Vehicle Care

309

2013 Edge (edg)
Owners Guide gf, 4th Printing, November 2012
USA
(fus)