FORD 2013 C-MAX Hybrid v.1 - Manual (Page 103)

Alarm
Action Message
Displays when the alarm has been triggered due to unauthor-
ized entry. See Anti-Theft Alarm (page 64).
To Stop Alarm, Start
Vehicle
Battery and Charging System (High Voltage)
Action Message
Displays when confirmation is needed that the vehicle is
unplugged before a start is allowed. You must make sure the
vehicle is unplugged and respond to the message prompt
before starting your vehicle.
Is Vehicle Plugged-In?
Displays when the stop safety hazard warning lamp is illumin-
ated. This indicates an electrical component fault/failure that
will cause the vehicle to shut down or enter into limited
operating mode.
Stop Safely Now
Displays when the vehicle is ready to drive. Ready to Drive
Displays when the vehicle detects it is still plugged and the
power is activated.
Unplug Prior to Starting
Vehicle
Displays when battery charge level is low. Check Battery Charge
Displays when the engine is on. Engine On
Doors
Action Message
Displays when the door(s) listed is not completely closed and
the vehicle is moving.
X Door Ajar
Displays when the door(s) listed is not completely closed.
Displays when the liftgate is not completely closed. Liftgate Ajar
100
Information Displays