beautypg.com

Unlocking and locking the doors, Displaying the factory set code, With integrated keyhead transmitters – FORD 2014 Flex v.1 User Manual

Page 85: 84 locks

background image

Unlocking and Locking the Doors

To unlock the driver door: Enter the factory-set 5-digit code or your
personal code. You must press each number within five seconds of each
other. The interior lamps will illuminate. Note: All doors will unlock if
the two-stage unlocking feature is disabled. Refer to Locking and
Unlocking
earlier in this chapter.

To unlock all doors: Enter the factory-set code or your personal code,
then press the 3

4 control within five seconds.

To lock all doors: Press and hold 7

8 and 90 at the same time with

the driver door closed. You do not need to enter the keypad code first.

Displaying the Factory Set Code

With Integrated Keyhead Transmitters

Note: You will need to have two programmed passive anti-theft keys for
this procedure.

To display the factory-set code in the information display:

1. Insert a key into the ignition and switch the ignition on for a few
seconds.

2. Switch the ignition off and remove the key.

3. Insert the second key into the ignition and switch the ignition on.

The factory-set code will display for a few seconds.

Note: The code may not display until after any other warning messages
first display.

84

Locks

2014 Flex (471)
Owners Guide gf, 1st Printing, April 2013
USA
(fus)