beautypg.com

Switching to normal cruise control, Cruise control 231 – FORD 2014 Flex v.1 User Manual

Page 232

background image

Cause

Action

The surface of the radar in the
grille is dirty or obstructed in
some way.

Clean the grille surface in front of
the radar or remove the object
causing the obstruction.

The surface of the radar in the
grille is clean but the message
remains in the display.

Wait a short time. It may take
several minutes for the radar to
detect that it is no longer
obstructed.

Heavy rain or snow is interfering
with the radar signals.

Do not use the system in these
conditions because it may not
detect any vehicle ahead.

Swirling water, or snow or ice on
the surface of the road may
interfere with the radar signals.

Do not use system in these
conditions because it may not
detect any vehicle ahead.

You are in a desert or remote area
with no other vehicles and no
roadside objects.

Wait a short time or switch to
normal cruise control.

Due to the nature of radar technology, it is possible to get a blockage
warning and not be blocked. This can happen, for example, when driving
in sparse rural or desert environments. A false blocked condition will
either self-clear or clear after a key cycle.

Switching to Normal Cruise Control

WARNING: Normal cruise control will not brake due to slower
vehicles. Always be aware of which mode is selected and apply

the brakes when necessary.

You can manually change from adaptive cruise control to normal cruise
control through the information display.

The cruise control indicator light will replace the adaptive
cruise control indicator light if normal cruise control is selected.
The gap setting will not be displayed, the system will not

automatically respond to lead vehicles and automatic braking will not be
activated. The system will default to adaptive cruise control when the
engine is started.

Cruise Control

231

2014 Flex (471)
Owners Guide gf, 1st Printing, April 2013
USA
(fus)