Rear view camera, Enable valet mode, Settings – FORD 2014 Flex v.1 User Manual
Page 488: System, Myford touch® (if equipped) 487
Rear View Camera
This menu allows you to access settings for your rear view camera.
Press the Settings icon > Vehicle > Rear View Camera, then select
from the following settings:
• Rear Camera Delay
• Visual Park Aid Alert
• Guidelines.
Enable Valet Mode
Note: If the system locks, and you need to reset the PIN, enter 3681 and
the system unlocks.
Valet mode allows you to lock the system. No information is accessible
until the system is unlocked with the correct PIN.
1. Press the Settings icon > Vehicle > Enable Valet Mode.
2. When prompted, enter a four-digit PIN.
After you press Continue, the system locks until you enter the PIN again.
Settings
Access and adjust system settings, voice features, as well as phone,
navigation and wireless settings.
System
Press the Settings icon > Settings > System, then select from
the following:
System
Language
Select to have the touchscreen display in
English, Spanish or French.
Distance
Select to display units in kilometers or miles.
Temperature
Select to display units in Celsius or
Fahrenheit.
System Prompt
Volume
Adjust the volume of voice prompts from the
system.
Touch Screen Button
Beep
Select to have the system beep to confirm
choices made through the touchscreen.
Touch Panel Button
Beep
Select to have the system beep to confirm
button choices made through the climate or
audio system.
MyFord Touch® (If Equipped)
487
2014 Flex (471)
Owners Guide gf, 1st Printing, April 2013
USA (fus)