BMW 650i Coupe 2006 - Manual (Page 81)

E
ve
ryth
ing un
de
r co
nt
rol
80
Less important messages disappear after
approx. 20 seconds, but remain in memory.
To hide these Check Control messages:
Press the CHECK button on the turn signal
lever.
Displaying stored Check Control
messages
1. Press the button longer:
The first stored message is displayed.
2. Press the button:
A new message appears each time you
press the button.
Displaying supplementary information
iDrive, for principle details, refer to page 16 .
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Service" and press the controller.
4. Select "Check Control messages" and
press the controller.
5. Select a message and press the controller.
To exit from the menu immediately:
Select the arrow and press the controller.
Displaying the urgency of malfunctions
Depending on the equipment, the stored Check
Control messages are also displayed with the
following symbols:
No malfunctions detected in the moni-
tored systems.
Malfunctions detected in the monitored
systems. Depending on the malfunction,
supplementary information is shown on
the Control Display.
The symbols also indicate the status of the ser-
vice requirements display, refer to page
77 .
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG